plastic shrink small outline package; 24 leads; body width 5.3 mm APPLICATIONS • Cordless base stations UBA1706 • Mains or battery-powered telephone sets. GENERAL DESCRIPTION The UBA1706 is a BiCMOS integrated circuit intended for use in mains-powered telecom terminals. It performs all speech and line interface functions, DC mask for voltage or current reg.
Line interface
• Low DC line voltage; operates down to 1.2 V (excluding polarity guard)
• Voltage regulator with adjustable DC voltage
• DC mask for voltage or current regulation (CTR21)
• Line current limitation for protection
• Electronic hook switch control input
• Transmit amplifier with:
– Symmetrical inputs
– Fixed gain
– Large signal handling capability.
• Receive amplifier with fixed gain
• Transmit and receive amplifiers Automatic Gain Control (AGC) for line loss compensation. General purpose switches Two switches with open-collector. 3-wire serial bus interface Allows control of:
• D.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UBA1702 |
NXP |
Line interrupter driver and ringer | |
2 | UBA1707 |
NXP |
Cordless telephone / answering machine line interface | |
3 | UBA1710M |
NXP |
Modulator for GaAs power amplifiers | |
4 | UBA2000T |
NXP |
Electronic TL-lamp starter | |
5 | UBA2013 |
Philips |
HB driver IC | |
6 | UBA2013L |
Philips |
HB driver IC | |
7 | UBA2013T |
Philips |
HB driver IC | |
8 | UBA2014 |
NXP |
600V driver IC | |
9 | UBA2015 |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
10 | UBA2015A |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
11 | UBA2016A |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
12 | UBA2017 |
NXP |
600V fluorescent lamp driver |