The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps. The IC can handle both cold and warm ignition of the lamp. It contains a TON-controlled PFC function, a half bridge controller circuit with level shifter and an internal bootstrap diode to drive an external half bridge. UBA2013/L3 also offers a functionality to properly hand.
2.1 Half bridge Suitable for cold and warm ignition Adjustable preheat time Adjustable ignition voltage Integrated bootstrap function Protection for lamp failure and end-of-life Adjustable preheat current Single ignition attempt Automatic restart after relamping Protection for capacitive mode 2.2 PFC Three pin PFC controller using TON control Critical mode operation Overvoltage/overcurrent protection 3. Applications The UBA2013/L3 can provide the drive and control function for a wide range of half bridge based ballast applications at different mains voltages. 4. Orde.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UBA2013 |
Philips |
HB driver IC | |
2 | UBA2013L |
Philips |
HB driver IC | |
3 | UBA2014 |
NXP |
600V driver IC | |
4 | UBA2015 |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
5 | UBA2015A |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
6 | UBA2016A |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
7 | UBA2017 |
NXP |
600V fluorescent lamp driver | |
8 | UBA2017A |
NXP |
600V fluorescent lamp driver | |
9 | UBA2000T |
NXP |
Electronic TL-lamp starter | |
10 | UBA2021 |
NXP |
630 V driver IC for CFL and TL lamps | |
11 | UBA2021 |
Philips |
630V driver IC | |
12 | UBA2024 |
NXP |
Half-bridge power IC |