plastic small outline package; 8 leads; body width 3.9 mm GENERAL DESCRIPTION UBA2000T The UBA2000T is an integrated circuit for electronic TL-lamp starters and is fully compatible with conventional glow switch starters. The circuit controls the preheating and ignition of the lamp. The preheat time is well defined without spread, since it is derived from t.
• Electronic starter, fully compatible with conventional glow-switch starters
• Reliable and instant ignition
• Accurate defined preheat time derived from the mains frequency
• Increased starter life since no mechanical parts are used
• No radio-interference (according to “IEC926 10.5”)
• Automatic reset after interruption of supply voltage
• Large operating temperature range: −40 to +85 °C
• Maximum current protection of the preheat current
• Ignition shut-off at end of lamp life; no overheating of load. ORDERING INFORMATION PACKAGE TYPE NUMBER NAME UBA2000T SO8 DESCRIPTION plastic small outl.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UBA2013 |
Philips |
HB driver IC | |
2 | UBA2013L |
Philips |
HB driver IC | |
3 | UBA2013T |
Philips |
HB driver IC | |
4 | UBA2014 |
NXP |
600V driver IC | |
5 | UBA2015 |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
6 | UBA2015A |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
7 | UBA2016A |
NXP Semiconductors |
(UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver | |
8 | UBA2017 |
NXP |
600V fluorescent lamp driver | |
9 | UBA2017A |
NXP |
600V fluorescent lamp driver | |
10 | UBA2021 |
NXP |
630 V driver IC for CFL and TL lamps | |
11 | UBA2021 |
Philips |
630V driver IC | |
12 | UBA2024 |
NXP |
Half-bridge power IC |