The TPT485E is 4.5V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs are protected against ±18 kV ESD strikes without latch-up. Transmitters in this family deliver exceptional differential output voltages as 2.5V (min) in 5Vcc power supplier, into the RS-485 required 54Ω load, .
◼ Exceeds Requirements of EIA-485 Standard
◼ Data Rate: 500 kbps
◼ Support Failsafe function
◼ Low Power Consumption: < 1 µA Standby
Supply Current
◼ Large Receiver Hysteresis: 60mV
◼ Up to 256 Nodes on a Bus (1/8 unit load)
◼ Wide Supply Voltage 4.5V to 5.5V
◼ SOP8 Package for Backward Compatibility
◼ Bus-Pin Protection:
⚫ ±18 kV HBM protection
⚫ ±12 kV IEC61000-4-2 Contact Discharge
TPT485E
± 18K ESD Protection, RS-485 Transceiver
Description
The TPT485E is 4.5V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPT485N |
3PEAK |
Bus-Polarity Correcting RS-485 Transceiver | |
2 | TPT487 |
3PEAK |
3.0V to 5.5V RS-485 Transceivers | |
3 | TPT4032 |
3PEAK |
High Speed Quad Differential RS422 Receiver | |
4 | TPT4089 |
3PEAK |
3.3V~5.0V Full Duplex RS-485 Transceivers | |
5 | TPT4181 |
3PEAK |
3.0V to 5.5V RS-485 Transceivers | |
6 | TPT0472S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
7 | TPT0572S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
8 | TPT1042Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
9 | TPT1042VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
10 | TPT1043 |
3PEAK |
Low-Power Fault Protected High-Speed CAN FD Transceiver | |
11 | TPT1051Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
12 | TPT1051VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver |