The TPT1043 is a CAN transceiver that meets the ISO11898 high-speed CAN (Controller Area Network) physical layer standard. The device is designed to be used in CAN FD networks up to 5 Mbps, with enhanced timing margin and higher data rates in long and highly loaded networks. As designed, the device features a –30-V to +30-V common-mode range, CAN-Bus fault p.
• Meet the ISO 11898-2:2016 and SAE J2284-1 to SAE
J2284-5 Physical Layer Standards
• Supports CAN FD and Data Rating up to 5 Mbps
• Short Propagation Delay Times and Fast Loop Times
• 5-V Power Supply, I/O Voltage Range Supports 2.8-V
to 5.5-V MCU Interface
• Standby Mode and Extra Low Current Sleep Mode with
Local and Remote Bus Wake-Up Capability and INH Output
• Ideal Passive Behavior to CAN Bus when Unpowered
• Common-Mode Input Voltage: ±30 V
• Protection Feature:
– IEC 61000-4-2 ESD Protection up to ±12 kV
– Bus Fault Protection: ±70 V
– VCC Undervoltage Protection
– TXD Dominant Time-O.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPT1042Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
2 | TPT1042VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
3 | TPT1051Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
4 | TPT1051VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
5 | TPT1145NQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
6 | TPT1145Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
7 | TPT1255 |
3PEAK |
Fault Protected High-Speed CAN FD Transceiver | |
8 | TPT1256 |
3PEAK |
Fault Protected High-Speed CAN FD Transceiver | |
9 | TPT1272S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
10 | TPT1330 |
3PEAK |
3.3-V Fault Protected High-Speed CAN FD Transceiver | |
11 | TPT1334 |
3PEAK |
3.3-V Fault Protected High-Speed CAN FD Transceiver | |
12 | TPT1337 |
3PEAK |
3.3-V Fault Protected High-Speed CAN FD Transceiver |