The TPT4181 is a 3.0 V to 5.5 V, IEC electrostatic discharge (ESD) protected RS-485 transceiver, and the device can support ±15 kV Contact Discharge on the transceiver bus pins without damage. The TPT4181 features a VIO logic supply pin allowing a flexible digital interface capable of operating as low as 1.65 V. Transmitters in this family deliver exceptiona.
⚫ Exceeds Requirements of EIA-485 Standard
⚫ Data Rate: 20Mbps or 500Kbps
⚫ Up to 256 Nodes on a Bus (1/8 unit load)
⚫ Full Fail-safe Receiver (Open, Short, Terminated)
⚫ Wide Supply Voltage 3V to 5.5V
⚫ 1.65V to Vcc Supply for Digital IOs
⚫ Bus-Pin Protection:
◼ ±18 kV HBM ESD
◼ ±15 kV IEC61000-4-2 Contact Discharge
◼ ±15 kV IEC61000-4-2 Air Discharge
Description
The TPT4181 is a 3.0 V to 5.5 V, IEC electrostatic discharge (ESD) protected RS-485 transceiver, and the device can support ±15 kV Contact Discharge on the transceiver bus pins without damage. The TPT4181 features a VIO logic supply.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPT4032 |
3PEAK |
High Speed Quad Differential RS422 Receiver | |
2 | TPT4089 |
3PEAK |
3.3V~5.0V Full Duplex RS-485 Transceivers | |
3 | TPT485E |
3PEAK |
RS-485 Transceiver | |
4 | TPT485N |
3PEAK |
Bus-Polarity Correcting RS-485 Transceiver | |
5 | TPT487 |
3PEAK |
3.0V to 5.5V RS-485 Transceivers | |
6 | TPT0472S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
7 | TPT0572S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
8 | TPT1042Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
9 | TPT1042VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
10 | TPT1043 |
3PEAK |
Low-Power Fault Protected High-Speed CAN FD Transceiver | |
11 | TPT1051Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
12 | TPT1051VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver |