plastic low profile quad flat package; 48 leads; body 7 × 7 × 1.4 mm APPLICATIONS TDA9962 • Low-power, low-voltage CCD camera systems. GENERAL DESCRIPTION The TDA9962 is a 12-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, PGA, clamp loops and a low-power 12-bit ADC together with its reference voltag.
• Correlated Double Sampling (CDS), Programmable Gain Amplifier (PGA), 12-bit Analog-to-Digital Converter (ADC) and reference regulator included
• Fully programmable via a 3-wire serial interface
• Sampling frequency up to 20 MHz
• PGA gain range of 24 dB (in steps of 0.1 dB)
• Low power consumption of only 140 mW at 2.7 V
• Power consumption in standby mode of 4.5 mW (typ.)
• 3.0 V operation and 2.2 to 3.6 V operation for the digital outputs
• All digital inputs accept 5 V signals
• Active control pulses polarity selectable via serial interface
• 8-bit DAC included for analog settings
• TTL c.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA9964 |
NXP |
12-bit/ 3.0 V/ 30 Msps analog-to-digital interface for CCD cameras | |
2 | TDA9965 |
NXP |
30 Msps analog-to-digital interface for CCD cameras | |
3 | TDA9965A |
NXP |
40 Msps analog-to-digital interface for CCD cameras | |
4 | TDA9901 |
NXP |
Wideband differential digital controlled variable gain amplifier | |
5 | TDA9910 |
NXP |
Analog-to-Digital Converter (ADC) direct/ultra high IF sampling | |
6 | TDA9917 |
NXP |
up to 250 Msample/s Analog-to-Digital Converter (ADC) | |
7 | TDA9935 |
NXP Semiconductors |
Dual 14-bit up to 160 Msample/s 2 interpolating Digital-to-Analog Converter | |
8 | TDA9952 |
NXP |
25 Msps analog-to-digital interface for CCD cameras | |
9 | TDA9981A |
NXP |
HDMI Transmitter Up To 150 MHz Pixel Rate | |
10 | TDA9981B |
NXP Semiconductors |
HDMI transmitter up to 150 MHz pixel rate | |
11 | TDA9983B |
NXP |
HDMI Transmitter Up To 150 MHz Pixel Rate | |
12 | TDA9984A |
NXP Semiconductors |
HDMI 1.3 transmitter |