The TDA9981A is an HDMI transmitter (which also supports DVI) that enables a 3 × 8-bit RGB or YCBCR video stream (with a pixel rate up to 150 MHz for the TDA9981AHL/15 version), up to 4 I2S-bus audio streams (with an audio sampling rate up to 192 kHz) and the additional information required by all the HDMI 1.2a standards. In order to be compatible with most .
s 3 × 8-bit video data input bus, CMOS and LV-TTL compatible s Horizontal synchronization, vertical synchronization and Data Enable (DE) inputs or VREF, HREF and FREF could be used for input data synchronization s Pixel rate clock input can be made active on one or both edges (selectable by I2C-bus) s The TDA9981A has 4 I2S-bus audio input channels and 1 S/PDIF channel; audio sampling rate up to 192 kHz s 250 MHz to 1.50 GHz HDMI transmitter operation s Programmable input formatter and upsampler/interpolator allows input of any of the 4 : 4 : 4, 4 : 2 : 2 semi-planar, 4 : 2 : 2 ITU656 and ITU6.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA9981B |
NXP Semiconductors |
HDMI transmitter up to 150 MHz pixel rate | |
2 | TDA9983B |
NXP |
HDMI Transmitter Up To 150 MHz Pixel Rate | |
3 | TDA9984A |
NXP Semiconductors |
HDMI 1.3 transmitter | |
4 | TDA9989 |
NXP |
150 MHz Pixel Rate HDMI 1.3a Transmitter | |
5 | TDA9901 |
NXP |
Wideband differential digital controlled variable gain amplifier | |
6 | TDA9910 |
NXP |
Analog-to-Digital Converter (ADC) direct/ultra high IF sampling | |
7 | TDA9917 |
NXP |
up to 250 Msample/s Analog-to-Digital Converter (ADC) | |
8 | TDA9935 |
NXP Semiconductors |
Dual 14-bit up to 160 Msample/s 2 interpolating Digital-to-Analog Converter | |
9 | TDA9952 |
NXP |
25 Msps analog-to-digital interface for CCD cameras | |
10 | TDA9962 |
NXP |
12-bit/ 3.0 V/ 20 Msps analog-to-digital interface for CCD cameras | |
11 | TDA9964 |
NXP |
12-bit/ 3.0 V/ 30 Msps analog-to-digital interface for CCD cameras | |
12 | TDA9965 |
NXP |
30 Msps analog-to-digital interface for CCD cameras |