The TDA8007BHL is a cost-effective card interface for dual smart card readers. Controlled through a parallel bus, it meets all requirements of ISO 7816, GSM 11-11, EMV4.2 and EMV 2000. It is addressed on a non-multiplexed 8-bit databus, by means of address registers AD0, AD1, AD2 and AD3. TDA8007BHL/C3 can be also addressed through a multiplexed access. The .
it greatly simplifies the realization of a reader of any number of cards. It gives the cards and the reader a very high level of security, due to its special hardware against ESD, short-circuiting, power failure, etc. The integrated step-up converter allows operation within a supply voltage range of 2.7 V to 6 V. TDA8007BHL/C4 supports onl.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8007B |
NXP |
Double multiprotocol IC card interface | |
2 | TDA8000 |
NXP |
Smart card interface | |
3 | TDA8000T |
NXP |
Smart card interface | |
4 | TDA8001 |
NXP |
Smart card interface | |
5 | TDA8002 |
NXP |
IC card interface | |
6 | TDA8002C |
NXP |
IC card interface | |
7 | TDA8003TS |
NXP |
I2C-bus SIM card interface | |
8 | TDA8004AT |
NXP |
IC card interface | |
9 | TDA8004T |
NXP |
IC card interface | |
10 | TDA8005 |
NXP |
Low-power smart card coupler | |
11 | TDA8005A |
NXP |
Low-power 3 V/5 V smart card coupler | |
12 | TDA8006 |
NXP |
Multiprotocol IC Card coupler |