The TDA8005 is a low cost card interface for portable smart card readers. Controlled through a standard serial interface, it takes care of all ISO 7816 and GSM11-11 requirements. It gives the card and the set a very high level of security, due to its special hardware against ESD, short-circuiting, power failure, etc. Its integrated step-up converter allows o.
• VCC generation (5 V ±5%, 20 mA maximum with controlled rise and fall times)
• Clock generation (up to 8 MHz), with two times synchronous frequency doubling
• Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for cards power-down mode
• Specific UART on I/O for automatic direct/inverse convention settings and error management at character level
• Automatic activation and deactivation sequences through an independent sequencer
• Supports the protocol T = 0 in accordance with ISO 7816, GSM11.11 requirements (Global System for Mobile communication); and EMV banking specifica.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8000 |
NXP |
Smart card interface | |
2 | TDA8000T |
NXP |
Smart card interface | |
3 | TDA8001 |
NXP |
Smart card interface | |
4 | TDA8002 |
NXP |
IC card interface | |
5 | TDA8002C |
NXP |
IC card interface | |
6 | TDA8003TS |
NXP |
I2C-bus SIM card interface | |
7 | TDA8004AT |
NXP |
IC card interface | |
8 | TDA8004T |
NXP |
IC card interface | |
9 | TDA8005A |
NXP |
Low-power 3 V/5 V smart card coupler | |
10 | TDA8006 |
NXP |
Multiprotocol IC Card coupler | |
11 | TDA8007B |
NXP |
Double multiprotocol IC card interface | |
12 | TDA8007BHL |
NXP |
Multiprotocol IC card interface |