plastic quad flat package; 64 leads (lead length 1.95 mm); body 14 × 20 × 2.8 mm APPLICATIONS TDA8006 • Smart card readers for multiprotocol applications (EMV banking, digital pay TV, access control, etc.). GENERAL DESCRIPTION It is assumed that the reader of this data sheet is familiar with ISO 7816. The TDA8006 is controlled either through a standard seri.
• 80C52 core with 16 kbyte ROM and 256 byte RAM
• Extra 1 kbyte RAM outside the core for data storage
• Control and communication through a standard RS232 full duplex interface or a parallel interface
• Specific ISO 7816 UART with parallel access on I/O for automatic convention processing, variable baud rate through frequency or division ratio programming, error management at character level for T = 0, extra guard time register
• VCC generation (5 V ±5% or 3 V ±5%, 65 mA maximum with controlled rise and fall times)
• Card clock generation (up to 10 MHz) with two times synchronous frequency dou.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8000 |
NXP |
Smart card interface | |
2 | TDA8000T |
NXP |
Smart card interface | |
3 | TDA8001 |
NXP |
Smart card interface | |
4 | TDA8002 |
NXP |
IC card interface | |
5 | TDA8002C |
NXP |
IC card interface | |
6 | TDA8003TS |
NXP |
I2C-bus SIM card interface | |
7 | TDA8004AT |
NXP |
IC card interface | |
8 | TDA8004T |
NXP |
IC card interface | |
9 | TDA8005 |
NXP |
Low-power smart card coupler | |
10 | TDA8005A |
NXP |
Low-power 3 V/5 V smart card coupler | |
11 | TDA8007B |
NXP |
Double multiprotocol IC card interface | |
12 | TDA8007BHL |
NXP |
Multiprotocol IC card interface |