• The TDA3683J is a multiple output voltage regulator with a power switch and an ignition buffer. Several protections and diagnostic options are incorporated in this design. • The TDA3683J is primarily developed to cover the complete power supply requirements in car radio applications • The standby regulators (regulators 1, 2 and 3) are especially designed.
s Three enable pin controlled standby regulators: x REG1: 5 V / 600 mA controlled by the EN1 input x REG2: 3.3 V / 200 mA controlled by the EN2/3 input x REG3: 1.9 V / 150 mA controlled by the EN2/3 input s Four mode pin controlled switched regulators: x REG4: 8.5 V / 350 mA x REG5: 5 V / 1.8 A x REG6: 3.3 V / 1.2 A x REG7: 2.4 V to 10 V / 2 A adjustable using external resistor divider s One mode pin controlled power switch; 2.2 A continuous and 3 A surge, with delayed lower current limit so as to be less sensitive to inrush currents s One independent ignition buffer (inverted output, open-col.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA3683 |
NXP |
Multiple voltage regulator | |
2 | TDA3681 |
NXP |
Multiple voltage regulator | |
3 | TDA3682 |
NXP |
Multiple voltage regulator | |
4 | TDA3601AQ |
NXP |
Multiple output voltage regulators | |
5 | TDA3601Q |
NXP |
Multiple output voltage regulators | |
6 | TDA3602 |
NXP |
Multiple output voltage regulator | |
7 | TDA3603 |
NXP |
Multiple voltage regulator | |
8 | TDA3604Q |
NXP |
Multiple voltage regulators | |
9 | TDA3604TH |
NXP |
Multiple voltage regulators | |
10 | TDA3605Q |
NXP |
Multiple voltage regulator | |
11 | TDA3606 |
NXP |
Multiple voltage regulator | |
12 | TDA3606A |
NXP |
Multiple voltage regulator |