TDA3602 The TDA3602 is a multiple output voltage regulator, intended for use in car radios with or without a microprocessor. It contains two fixed voltage regulators with foldback current protection (Regulators 1 and 2), and one fixed voltage regulator that also operates during load dump and thermal shutdown. This regulator can be used to supply a micropro.
• Two VP state controlled regulators (REG1 and REG2)
• Regulator 3 operates during load dump or thermal shutdown
• Multi-function control pin
• A back-up circuit for Regulator 3 via a single capacitor
• Supply voltage of −6 V to 50 V (a voltage of −3 V on VP does not discharge capacitor Cbu)
• Low reverse current Regulator 3
• Low quiescent current in coma mode
• HOLD output
• RESET output (LOW at load dump)
• High ripple rejection. PROTECTIONS
• Foldback current limit protection (Regulators 1 and 2)
• Load dump protection
• Thermal protection
• DC short-circuit safe to ground and VP of all re.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA3601AQ |
NXP |
Multiple output voltage regulators | |
2 | TDA3601Q |
NXP |
Multiple output voltage regulators | |
3 | TDA3603 |
NXP |
Multiple voltage regulator | |
4 | TDA3604Q |
NXP |
Multiple voltage regulators | |
5 | TDA3604TH |
NXP |
Multiple voltage regulators | |
6 | TDA3605Q |
NXP |
Multiple voltage regulator | |
7 | TDA3606 |
NXP |
Multiple voltage regulator | |
8 | TDA3606A |
NXP |
Multiple voltage regulator | |
9 | TDA3607 |
NXP |
Multiple voltage regulator | |
10 | TDA3608Q |
NXP |
Multiple voltage regulators | |
11 | TDA3608TH |
NXP |
Multiple voltage regulators | |
12 | TDA3609JR |
NXP |
Multiple voltage regulator |