TDA3606 The TDA3606 is a low power voltage regulator. It contains: 1. One fixed voltage regulator with a foldback current protection, intended to supply a microprocessor that also operates during load dump 2. A reset-signal can be used to interface with the microprocessor 3. Supply pin can withstand load dump pulses and negative supply voltages 4. Defined .
• One VP-state controlled regulator
• Regulator and reset outputs operate during load dump
• Supply voltage range of −18 to +50 V
• Low quiescent current (battery detection switched off)
• High ripple rejection
• Dual reset output. PROTECTIONS
• Reverse polarity safe (down to −18 V without high reverse current)
• Able to withstand voltages up to 18 V at the output (supply line may be short-circuited)
• ESD protected on all pins
• Load dump protection
• Foldback current limit protection for regulator
• DC short-circuit safe to ground and VP of regulator output. QUICK REFERENCE DATA SYMBOL Suppl.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA3601AQ |
NXP |
Multiple output voltage regulators | |
2 | TDA3601Q |
NXP |
Multiple output voltage regulators | |
3 | TDA3602 |
NXP |
Multiple output voltage regulator | |
4 | TDA3603 |
NXP |
Multiple voltage regulator | |
5 | TDA3604Q |
NXP |
Multiple voltage regulators | |
6 | TDA3604TH |
NXP |
Multiple voltage regulators | |
7 | TDA3605Q |
NXP |
Multiple voltage regulator | |
8 | TDA3606A |
NXP |
Multiple voltage regulator | |
9 | TDA3607 |
NXP |
Multiple voltage regulator | |
10 | TDA3608Q |
NXP |
Multiple voltage regulators | |
11 | TDA3608TH |
NXP |
Multiple voltage regulators | |
12 | TDA3609JR |
NXP |
Multiple voltage regulator |