TA8205AL - Toshiba Semiconductor

TA8205AL 18W BTL x 2CH AUDIO POWER AMPLIFIER

is made only on the single channel.) 1. Voltage gain adjustment This IC has the amplifier construction as shown in Fig.1. The pre-amp. Amp 1 is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp. Amp 2. Since the input offset is prevented by pre-amp when VCC is set to on, .

Features

due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels. In addition, the functions of stand−by and muting, and a variety of protection circuits are involved. Features
· Low thermal resistance : θj−T = 1.5°C / W (infinite heat sink)
· High power : POUT (1) = 18W (typ.) / channel (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) POUT (2) = 15W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω) Weight HZIP17−P−2.00 : 9.8g (typ.).