is made only on the single channel.) 1. Voltage gain adjustment This IC has the amplifier construction as shown in Fig.1. The pre-amp (amp 1) is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp. (Amp 2). Since the input offset is prevented by pre-amp when VCC is set to o.
due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels. In addition, the functions of stand−by and muting, and a variety of protection circuits are involved.
Features
· Low thermal resistance
: θj−T = 1.5°C / W (infinite heat sink)
· High power
: POUT (1) = 22W (typ.) / channel (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) POUT (2) = 19W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω)
Weight HZIP17−P−2.00: 9.8g (typ.) H.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TA8210AH |
Toshiba |
20W BTL x 2CH AUDIO POWER AMPLIFIER | |
2 | TA8210AHQ |
Toshiba Semiconductor |
20W BTL X 2ch Audio Power Amplifier | |
3 | TA8210ALQ |
Toshiba Semiconductor |
20W BTL X 2ch Audio Power Amplifier | |
4 | TA8211AH |
Toshiba |
DUAL AUDIO POWER AMPLIFIER | |
5 | TA8212F |
Toshiba |
4CH POWER DRIVER IC FOR CD PLAYER | |
6 | TA8213K |
Toshiba |
AUDIO POWER AMPLIFIER | |
7 | TA8214K |
Toshiba |
MULTI OUTPUT VOLTAGE REGULATOR | |
8 | TA8215H |
Toshiba |
18W BTL x 3CH AUDIO POWER AMPLIFIER | |
9 | TA8215HQ |
Toshiba |
18W BTL x 2CH Audio Power Amplifier | |
10 | TA8215L |
Toshiba |
18W BTL x 3CH AUDIO POWER AMPLIFIER | |
11 | TA8215LQ |
Toshiba |
18W BTL x 2CH Audio Power Amplifier | |
12 | TA8216H |
Toshiba |
DUAL AUDIO POWER AMPLIFIER |