is made only on the single channel.) 1. Voltage gain adjustment This IC has the amplifier construction as shown in Fig.1. The pre-amp. Amp 1 is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp. Amp 2. Since the input offset is prevented by pre-amp when VCC is set to on, .
due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels. In addition, the functions of stand−by and muting, and a variety of protection circuits are involved.
Features
· Low thermal resistance
: θj−T = 1.5°C / W (infinite heat sink)
· High power
: POUT (1) = 18W (typ.) / channel
(VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) POUT (2) = 15W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω)
Weight HZIP17−P−2.00 : 9.8g (typ.).
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TA8205AL |
Toshiba Semiconductor |
18W BTL x 2CH AUDIO POWER AMPLIFIER | |
2 | TA8200AH |
Toshiba Semiconductor |
DUAL AUDIO POWER AMPLIFIER | |
3 | TA8201AK |
Toshiba Semiconductor |
BTL AUDIO POWER AMPLIFIER | |
4 | TA8207K |
Toshiba Semiconductor |
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic | |
5 | TA8207K |
UTC |
LOW FREQUENCY POWER AMPLIFIER | |
6 | TA8208H |
Toshiba Semiconductor |
5.8W DUAL AUDIO POWER AMPLIFIER | |
7 | TA8210AH |
Toshiba |
20W BTL x 2CH AUDIO POWER AMPLIFIER | |
8 | TA8210AHQ |
Toshiba Semiconductor |
20W BTL X 2ch Audio Power Amplifier | |
9 | TA8210AL |
Toshiba |
20W BTL x 2CH AUDIO POWER AMPLIFIER | |
10 | TA8210ALQ |
Toshiba Semiconductor |
20W BTL X 2ch Audio Power Amplifier | |
11 | TA8211AH |
Toshiba |
DUAL AUDIO POWER AMPLIFIER | |
12 | TA8212F |
Toshiba |
4CH POWER DRIVER IC FOR CD PLAYER |