The SP9502 is a low power, dual version of the popular SP9345, Quad 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter is doublebuffered for easy microprocessor interface. Each 12-bit DAC is independently addressable and both DACS may be simultaneously updated using a single transfer command. The ou.
±4.5V output swings when using ±5 volt supplies. The converter is doublebuffered for easy microprocessor interface. Each 12-bit DAC is independently addressable and both DACS may be simultaneously updated using a single transfer command. The output settling-time is specified at 4µs. The SP9502 is available in 28
–pin SOIC and DIP packages, specified over commercial temperature range.
Ref In 1 INPUT REGISTERS DATA INPUTS 8 MSB's 4 LSB's LATCH LATCH DAC LATCH DAC REGISTERS
– LATCH DAC + VOUT1 Ref In 2
– + VOUT2
CONTROL LOGIC
A
CS
WR1 B1/B2 WR2 XFER CLR
SP9502DS/02
SP9502 Dual, 12-Bit, Volt.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP9500 |
Sipex |
12-Bit / Voltage Output D/A Converter | |
2 | SP9501 |
Sipex |
12-Bit / Voltage Output D/A Converter | |
3 | SP9504 |
Sipex |
Quad / 12-Bit / Voltage Output D/A Converter | |
4 | SP959B |
SIPAT |
DECT RF Filters | |
5 | SP959B01-TD01 |
Sipat |
Surface Acoustic Wave Filter | |
6 | SP903 |
SIPAT |
DECT RF Filters | |
7 | SP915 |
SIPAT |
DECT RF Filters | |
8 | SP916 |
ETC |
Service Manual | |
9 | SP927 |
SIPAT |
DECT RF Filters | |
10 | SP9270 |
Si-Power |
SP9270 | |
11 | SP92701 |
Plessey Semiconductors |
Sub-Nanosecond ECL Line Receiver and Driver | |
12 | SP930 |
SIPAT |
DECT RF Filters |