The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is available in 8–pin 0.15" SOIC and DIP packages, specified over commercial and .
±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3
–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is available in 8
–pin 0.15" SOIC and DIP packages, specified over commercial and industrial temperature ranges.
Ref In
DAC REGISTER LATCH DAC
– + VOUT
SHIFT REGISTER
CS
SDI
SCK
SP9501DS/02
SP9501 12-Bit, Low-Power Voltage Output
© Copyright 2000 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these or any other ab.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP9500 |
Sipex |
12-Bit / Voltage Output D/A Converter | |
2 | SP9502 |
Sipex Corporation |
Voltage Output D/A Converter | |
3 | SP9504 |
Sipex |
Quad / 12-Bit / Voltage Output D/A Converter | |
4 | SP959B |
SIPAT |
DECT RF Filters | |
5 | SP959B01-TD01 |
Sipat |
Surface Acoustic Wave Filter | |
6 | SP903 |
SIPAT |
DECT RF Filters | |
7 | SP915 |
SIPAT |
DECT RF Filters | |
8 | SP916 |
ETC |
Service Manual | |
9 | SP927 |
SIPAT |
DECT RF Filters | |
10 | SP9270 |
Si-Power |
SP9270 | |
11 | SP92701 |
Plessey Semiconductors |
Sub-Nanosecond ECL Line Receiver and Driver | |
12 | SP930 |
SIPAT |
DECT RF Filters |