Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The SP9500 is a low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5V output swing when using +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 7.5µs. The SP9500 is available in 8–pin 0.15" SOIC and DIP packages, specified over commercial .
0.5 to 4.5V output swing when using +5volt supply. The converter uses a standard 3
–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 7.5µs. The SP9500 is available in 8
–pin 0.15" SOIC and DIP packages, specified over commercial and industrial temperature ranges.
VREF DAC REGISTER LATCH DAC
+
–
VOUT
AGND SHIFT REGISTER
CS DIN SCLK
SP9500DS/04
SP9500 12-Bit, Voltage Output D/A Converter
© Copyright 2000 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these or any.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | SP9501 |
Sipex |
12-Bit / Voltage Output D/A Converter |
|
| 2 | SP9502 |
Sipex Corporation |
Voltage Output D/A Converter |
|
| 3 | SP9504 |
Sipex |
Quad / 12-Bit / Voltage Output D/A Converter |
|
| 4 | SP959B |
SIPAT |
DECT RF Filters |
|
| 5 | SP959B01-TD01 |
Sipat |
Surface Acoustic Wave Filter |
|
| 6 | SP903 |
SIPAT |
DECT RF Filters |
|
| 7 | SP915 |
SIPAT |
DECT RF Filters |
|
| 8 | SP916 |
ETC |
Service Manual |
|
| 9 | SP927 |
SIPAT |
DECT RF Filters |
|
| 10 | SP9270 |
Si-Power |
SP9270 |
|
| 11 | SP92701 |
Plessey Semiconductors |
Sub-Nanosecond ECL Line Receiver and Driver |
|
| 12 | SP930 |
SIPAT |
DECT RF Filters |
|