SP3401 is specifically designed to protect high-speed interfaces against ElectroStatic Discharge (ESD), such as DisplayPort interfaces and USB 3.1 Gen 1. The signal line is protected by a TVS diode offering low line capacitance of 0.35 pF typical. SP3401 can safely absorb repetitive ESD strikes up to ±18 kV contact exceeding IEC 61000-4-2, level 4 ( ±8kV con.
• ESD, IEC 61000-4-2, ±18kV contact, ±30kV air
• EFT, IEC 61000-4-4, 80A (tP=5/50ns)
• Lightning, IEC 610004-5 2nd edition, 10A (tP=8/20μs)
• Low capacitance of 0.35pF (TYP) per I/O
• Low leakage current of 1nA (TYP) at 3.3V
• Small form factor μDFN (JEDEC MO-229) package provides flow through routing to simplify PCB layout
• AEC-Q101 qualified
• Moisture Sensitivity Level(MSL -1)
• Halogen free, lead free and RoHS compliant
Applications
• USB 3.1 Gen1
• DisplayPort
• S-ATA
• NFC
• 1G/2.5G/10G Ethernet
Life Support Note: Not Intended for Use in Life Support or Life Saving Applicati.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP3400 |
Littelfuse |
Diode Array | |
2 | SP3406 |
SYNC POWER |
600mA Buck Converter | |
3 | SP34063A |
Exar |
1.5A Buck/Boost/Inverting DC-DC Regulator | |
4 | SP34063A |
Sipex Corporation |
1.5A Buck/Boost/Inverting DC-DC Switching Regulator | |
5 | SP3420 |
Littelfuse |
6A Diode Array | |
6 | SP3422 |
Littelfuse |
TVS Diode Arrays | |
7 | SP3481 |
Sipex |
+3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate | |
8 | SP3483 |
MaxLinear |
3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver | |
9 | SP3483 |
Exar |
+3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver | |
10 | SP3483 |
Sipex |
+3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver | |
11 | SP3485 |
MaxLinear |
3.3V Low Power Half-Duplex RS-485 Transceiver | |
12 | SP3485 |
Exar |
+3.3V Low Power Half-Duplex RS-485 Transceiver |