ORDERING INFORMATION The SN74LVC373A octal transparent D-type latch is designed for 2.7-V to 3.6-V VCC operation. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight ou.
1
• Qualified for Automotive Applications
• ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
• Operates From 2 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max tpd of 7.5 ns at 3.3 V
• Typical VOLP (Output Ground Bounce) < 0.8 V
at VCC = 3.3 V, TA = 25°C
• Typical VOHV (Output VOH Undershoot) > 2 V
at VCC = 3.3 V, TA = 25°C
• Supports Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage With 3.3-V VCC)
• Ioff Supports Partial-Power-Down Mode
Operation
DW OR PW PACKAGE (TOP VIEW)
OE 1 1Q 2 1D 3 2D 4 2Q 5 3Q 6 3D .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74LVC373A-EP |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
2 | SN74LVC373A |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
3 | SN74LVC374A |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
4 | SN74LVC374A-EP |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
5 | SN74LVC374A-Q1 |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
6 | SN74LVC32244 |
Texas Instruments |
32-BIT BUFFER/DRIVER | |
7 | SN74LVC32245 |
Texas Instruments |
32-BIT BUS TRANSCEIVER | |
8 | SN74LVC32373A |
Texas Instruments |
32-BIT TRANSPARENT D-TYPE LATCH | |
9 | SN74LVC32374A |
Texas Instruments |
32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
10 | SN74LVC32A |
Texas Instruments |
Quadruple 2-Input Positive-OR Gates | |
11 | SN74LVC32A-EP |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-OR GATE | |
12 | SN74LVC32A-Q1 |
Texas Instruments |
Automotive Quadruple 2-Input Positive-OR Gate |