ordering information This 32-bit noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation. The SN74LVC32245 is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements. This device can be used as four 8-bit transceivers, two 16-bit transceivers, or one 32-bit tra.
, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, O.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74LVC32244 |
Texas Instruments |
32-BIT BUFFER/DRIVER | |
2 | SN74LVC32373A |
Texas Instruments |
32-BIT TRANSPARENT D-TYPE LATCH | |
3 | SN74LVC32374A |
Texas Instruments |
32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
4 | SN74LVC32A |
Texas Instruments |
Quadruple 2-Input Positive-OR Gates | |
5 | SN74LVC32A-EP |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-OR GATE | |
6 | SN74LVC32A-Q1 |
Texas Instruments |
Automotive Quadruple 2-Input Positive-OR Gate | |
7 | SN74LVC373A |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
8 | SN74LVC373A-EP |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
9 | SN74LVC373A-Q1 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
10 | SN74LVC374A |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
11 | SN74LVC374A-EP |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
12 | SN74LVC374A-Q1 |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop |