ordering information This 32-bit transparent D-type latch is designed for 1.65-V to 3.6-V VCC operation. The SN74LVC32373A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as four 8-bit latches, two 16-bit latches, or one 32-bit latch. When the latch-enable (LE) input is h.
2-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect internal operati.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74LVC32374A |
Texas Instruments |
32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
2 | SN74LVC32244 |
Texas Instruments |
32-BIT BUFFER/DRIVER | |
3 | SN74LVC32245 |
Texas Instruments |
32-BIT BUS TRANSCEIVER | |
4 | SN74LVC32A |
Texas Instruments |
Quadruple 2-Input Positive-OR Gates | |
5 | SN74LVC32A-EP |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-OR GATE | |
6 | SN74LVC32A-Q1 |
Texas Instruments |
Automotive Quadruple 2-Input Positive-OR Gate | |
7 | SN74LVC373A |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
8 | SN74LVC373A-EP |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
9 | SN74LVC373A-Q1 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
10 | SN74LVC374A |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
11 | SN74LVC374A-EP |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
12 | SN74LVC374A-Q1 |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop |