This 10-bit buffer and bus/MOS driver provides a high-performance bus interface for wide data paths or buses carrying parity. The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all ten outputs are in the high-impedance state. The outputs are also in the high-impedance state during.
AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all ten outputs are in the high-impedance state. The outputs are also in the high-impedance state during power-up and power-down conditions. The outputs remain in the high-impedance state while the device is powered down. The outputs, which are designed to source or sink up to 12 mA, include 33-Ω series resistors to reduce overshoot and undershoot. The SN64BCT2827C is characterized for operation from − 40°C to 85°C and 0°C to 70°C. FUNCTION TABLE INPUTS OE1 OE2 A OUTPUT Y LLL L L LH H HXX Z XH.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN64BCT2240 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
2 | SN64BCT2241 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
3 | SN64BCT2244 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
4 | SN64BCT240 |
Texas Instruments |
Octal Buffer/Driver | |
5 | SN64BCT241 |
Texas Instruments |
Octal Buffer/Driver | |
6 | SN64BCT244 |
Texas Instruments |
Octal Buffer/Driver | |
7 | SN64BCT245 |
Texas Instruments |
Octal Bus Transceiver | |
8 | SN64BCT25244 |
Texas Instruments |
25-Ohm Octal Buffer/Driver | |
9 | SN64BCT25245 |
Texas Instruments |
25 Ohm Octal Bus Transceiver | |
10 | SN64BCT29828B |
Texas Instruments |
10-Bit Buffer/Driver | |
11 | SN64BCT125A |
Texas Instruments |
Quadruple Bus Buffer Gate | |
12 | SN64BCT126A |
Texas Instruments |
QUADRUPLE BUS BUFFER GATE |