The SN64BCT25244 is a 25-Ω octal buffer and line driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented transceivers. When the output-enable (1OE and 2OE) inputs are low, the device transmits data from the A inputs to the Y outputs. When 1OE and 2OE are high, the outputs are.
d bus-oriented transceivers. When the output-enable (1OE and 2OE) inputs are low, the device transmits data from the A inputs to the Y outputs. When 1OE and 2OE are high, the outputs are in the high-impedance state. This buffer/driver is capable of sinking 188-mA IOL, which facilitates switching 25-Ω transmission lines on the incident wave. The distributed VCC and GND pins minimize switching noise for more reliable system operation. The outputs are in a high-impedance state during power up and power down while the supply voltage value is less than approximately 3 V. The SN64BCT25244 is charact.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN64BCT25245 |
Texas Instruments |
25 Ohm Octal Bus Transceiver | |
2 | SN64BCT2240 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
3 | SN64BCT2241 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
4 | SN64BCT2244 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
5 | SN64BCT240 |
Texas Instruments |
Octal Buffer/Driver | |
6 | SN64BCT241 |
Texas Instruments |
Octal Buffer/Driver | |
7 | SN64BCT244 |
Texas Instruments |
Octal Buffer/Driver | |
8 | SN64BCT245 |
Texas Instruments |
Octal Bus Transceiver | |
9 | SN64BCT2827C |
Texas Instruments |
10-Bit BUS/MOS Memory Driver | |
10 | SN64BCT29828B |
Texas Instruments |
10-Bit Buffer/Driver | |
11 | SN64BCT125A |
Texas Instruments |
Quadruple Bus Buffer Gate | |
12 | SN64BCT126A |
Texas Instruments |
QUADRUPLE BUS BUFFER GATE |