The SN64BCT25245 is a 25-Ω octal bus transceiver designed for asynchronous communication between data buses. It improves both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented transceivers. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic level.
drivers, and bus-oriented transceivers. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic level at the direction-control (DIR) input. The output-enable (OE) input can disable the device so that both buses are effectively isolated. This transceiver is capable of sinking 188-mA IOL, which facilitates switching 25-Ω transmission lines on the incident wave. The distributed VCC and GND pins minimize switching noise for more reliable system operation. The outputs are in a high-impedance state during power up and power down while t.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN64BCT25244 |
Texas Instruments |
25-Ohm Octal Buffer/Driver | |
2 | SN64BCT2240 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
3 | SN64BCT2241 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
4 | SN64BCT2244 |
Texas Instruments |
Octal Buffer and LINE/MOS Driver | |
5 | SN64BCT240 |
Texas Instruments |
Octal Buffer/Driver | |
6 | SN64BCT241 |
Texas Instruments |
Octal Buffer/Driver | |
7 | SN64BCT244 |
Texas Instruments |
Octal Buffer/Driver | |
8 | SN64BCT245 |
Texas Instruments |
Octal Bus Transceiver | |
9 | SN64BCT2827C |
Texas Instruments |
10-Bit BUS/MOS Memory Driver | |
10 | SN64BCT29828B |
Texas Instruments |
10-Bit Buffer/Driver | |
11 | SN64BCT125A |
Texas Instruments |
Quadruple Bus Buffer Gate | |
12 | SN64BCT126A |
Texas Instruments |
QUADRUPLE BUS BUFFER GATE |