The SK10E/100E131 is a Quad master-slave D-type flipflop with differential outputs. Each flip-flop may be clocked separately by holding Common Clock (CC) LOW and using the Clock Enable (CE*) inputs for clocking. Common clocking is achieved by holding the CE inputs LOW and using CC to clock all four flip-flops. In this case, the CE* inputs perform the functio.
•
•
•
•
•
•
•
• 1100 MHz Minimum Toggle Frequency Differential Outputs Individual and Common Clocks Individual Resets (asynchronous) Paired Sets (asynchronous) Extended 100E VEE Range of
–4.2V to
–5.5V 75KΩ Internal Input Pulldown Resistors Fully Compatible with MC10E131 and MC100E131 Specified Over Industrial Temperature Range:
–40oC to 85oC ESD Protection of >4000V Available in 28-pin PLCC Package
Individual asynchronous resets are provided (R).
• Asynchronous set controls (S) are ganged together in pairs, with the pairing chosen to reflect physical chip
• symmetry.
• Data enters the master.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SK100E111 |
Semtech Corporation |
1:9 Differential Clock Driver | |
2 | SK100E116 |
Semtech Corporation |
Quint Differential Line Receiver | |
3 | SK100E142 |
Semtech Corporation |
9-Bit Shift Register | |
4 | SK100E151 |
Semtech Corporation |
6-Bit D Register | |
5 | SK100E016 |
Semtech Corporation |
8-Bit Synchronous Binary Up Counter | |
6 | SK100E445 |
Semtech Corporation |
4-Bit Serial/Parallel Converter | |
7 | SK100EL01W |
Semtech Corporation |
4-Input OR / NOR | |
8 | SK100EL07 |
Semtech Corporation |
2-Input XOR / XNOR | |
9 | SK100EL11W |
Semtech Corporation |
1:2 Differential Fanout Buffer | |
10 | SK100EL12W |
Semtech Corporation |
Low Impedance Driver | |
11 | SK100EL14W |
Semtech Corporation |
1:5 Clock Distribution Chip | |
12 | SK100EL15W |
Semtech Corporation |
1:4 Clock Distribution |