The SK10/100EL14W is a 1:5 Clock Distribution Chip designed specifically for low skew clock distribution applications. This device is fully compatible with MC100EL14 and MC100LVEL14. The device can be driven by either differential or singleended ECL/PECL input signals. The SK10/100EL14W provides a VBB output for either single-ended use or DC bias for AC coup.
a multiplexed clock input to allow for the distribution of a lower speed scan or test clock along with the high speed system clock. When LOW (or left open and pulled LOW by the input pulldown resistor) the SEL pin will select the differential clock input. The Common Enable pin (EN
*) is synchronous so that the outputs will only be enabled/disabled when they are already in the LOW state. This avoids the chance of generating a runt clock pulse when the device is enabled/disabled as can happen with an asynchronous control. The internal flipflops are clocked on the falling edge of the input clock; .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SK100EL11W |
Semtech Corporation |
1:2 Differential Fanout Buffer | |
2 | SK100EL12W |
Semtech Corporation |
Low Impedance Driver | |
3 | SK100EL15W |
Semtech Corporation |
1:4 Clock Distribution | |
4 | SK100EL16TA |
Semtech |
Differential Receiver | |
5 | SK100EL16TB |
Semtech |
Differential Receiver | |
6 | SK100EL16TC |
Semtech |
Differential Receiver | |
7 | SK100EL16TD |
Semtech |
Differential Receiver | |
8 | SK100EL16V |
Semtech Corporation |
Differential Receiver with Variable Output Swing | |
9 | SK100EL01W |
Semtech Corporation |
4-Input OR / NOR | |
10 | SK100EL07 |
Semtech Corporation |
2-Input XOR / XNOR | |
11 | SK100ELT21W |
Semtech Corporation |
Differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator | |
12 | SK100E016 |
Semtech Corporation |
8-Bit Synchronous Binary Up Counter |