The NX3L4357 is a low-ohmic single-pole triple-throw analog switch suitable for use as an analog or digital 3:1 multiplexer/demultiplexer. It has two digital select inputs (S0 and S1), one digital enable input (E), three independent inputs/outputs (Y0, Y1 and Y2) and a common input/output (Z). The device features a broadcast mode, when S0 and S1 are both hig.
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
1.65 (typical) at VCC = 1.4 V 0.95 (typical) at VCC = 1.65 V 0.55 (typical) at VCC = 2.3 V 0.50 (typical) at VCC = 2.7 V 0.50 (typical) at VCC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V MM JESD22-A115-A exceeds 200 V CDM AEC-Q100-011 revision B exceeds 1000 V IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78B Class II Lev.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX3L4051 |
NXP Semiconductors |
Single low-ohmic 8-channel analog switch | |
2 | NX3L4053 |
NXP |
Triple low-ohmic single-pole double-throw analog switch | |
3 | NX3L4053-Q100 |
NXP |
Triple low-ohmic single-pole double-throw analog switch | |
4 | NX3L4684 |
NXP |
Low-ohmic Dual Single-pole Double-throw Analog Switch | |
5 | NX3L1G3157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw analog switch | |
6 | NX3L1G3157-Q100 |
NXP |
Low-ohmic single-pole double-throw analog switch | |
7 | NX3L1G384 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
8 | NX3L1G53 |
NXP |
Low-ohmic Single-pole Double-throw Analog Switch | |
9 | NX3L1G66 |
NXP Semiconductors |
Low-voltage analog switch | |
10 | NX3L1G66-Q100 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
11 | NX3L1T3157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw analog switch | |
12 | NX3L1T384 |
NXP |
Single-pole Single-throw Analog Switch |