The 8-pin pinout is listed in Table 1-3. TABLE 1-3: MCP2551 PINOUT Pin Pin Number Name Pin Function 1 TXD Transmit Data Input 2 VSS Ground 3 VDD Supply Voltage 4 RXD Receive Data Output 5 VREF Reference Output Voltage 6 CANL CAN Low-Level Voltage I/O 7 CANH CAN High-Level Voltage I/O 8 RS Slope-Control Input MCP2551 1.7.1 TRANSMITTER DATA INPUT (TXD) .
• Supports 1 Mb/s operation
• Implements ISO-11898 standard physical layer
requirements
• Suitable for 12V and 24V systems
• Externally-controlled slope for reduced RFI
emissions
• Detection of ground fault (permanent Dominant)
on TXD input
• Power-on Reset and voltage brown-out protection
• An unpowered node or brown-out event will not
disturb the CAN bus
• Low current standby operation
• Protection against damage due to short-circuit
conditions (positive or negative battery voltage)
• Protection against high-voltage transients
• Automatic thermal shutdown protection
• Up to 112 nodes can be .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCP25020 |
Microchip |
CAN I/O Expander | |
2 | MCP25025 |
Microchip |
CAN I/O Expander | |
3 | MCP25050 |
Microchip |
CAN I/O Expander | |
4 | MCP25055 |
Microchip |
CAN I/O Expander | |
5 | MCP2510 |
Microchip Technology |
Stand-Alone CAN Controller with SPI Interface | |
6 | MCP2515 |
Microchip Technology |
Stand-Alone CAN Controller | |
7 | MCP2517FD |
Microchip |
External CAN FD Controller | |
8 | MCP2542FD |
Microchip |
CAN FD Transceiver | |
9 | MCP2542WFD |
Microchip |
CAN FD Transceiver | |
10 | MCP2544FD |
Microchip |
CAN FD Transceiver | |
11 | MCP2544WFD |
Microchip |
CAN FD Transceiver | |
12 | MCP2561 |
Microchip |
High-Speed CAN Transceiver |