• Supports 1 Mb/s Operation • Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements • Very Low Standby Current (5 µA, typical) • VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O • SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes • CAN Bus Pins are Dis.
Description:
• Supports 1 Mb/s Operation
• Implements ISO-11898-2 and ISO-11898-5
Standard Physical Layer Requirements
• Very Low Standby Current (5 µA, typical)
• VIO Supply Pin to Interface Directly to
CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
• SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
• CAN Bus Pins are Disconnected when Device is Unpowered: - An Unpowered Node or Brown-Out Event will
Not Load the CAN Bus
• Detection of Ground Fault:
- Permanent Dominant Detection on TXD - Permanent Dominant Detection on Bus
• Power-on Reset and.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCP25612FD |
Microchip |
Dual CAN Flexible Data-Rate Transceiver | |
2 | MCP2561FD |
Microchip |
High-Speed CAN Flexible Data Rate Transceiver | |
3 | MCP2562 |
Microchip |
High-Speed CAN Transceiver | |
4 | MCP25625 |
Microchip |
CAN Controller | |
5 | MCP2562FD |
Microchip |
High-Speed CAN Flexible Data Rate Transceiver | |
6 | MCP25020 |
Microchip |
CAN I/O Expander | |
7 | MCP25025 |
Microchip |
CAN I/O Expander | |
8 | MCP25050 |
Microchip |
CAN I/O Expander | |
9 | MCP25055 |
Microchip |
CAN I/O Expander | |
10 | MCP2510 |
Microchip Technology |
Stand-Alone CAN Controller with SPI Interface | |
11 | MCP2515 |
Microchip Technology |
Stand-Alone CAN Controller | |
12 | MCP2517FD |
Microchip |
External CAN FD Controller |