The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages. It is also capable of both acceptance filtering a.
• Implements Full CAN V2.0A and V2.0B at 1 Mb/s - 0 - 8 byte message length - Standard and extended data frames - Programmable bit rate up to 1 Mb/s - Support for remote frames - Two receive buffers with prioritized message storage - Six full acceptance filters - Two full acceptance filter masks - Three transmit buffers with prioritization and abort features - Loop-back mode for self test operation
• Hardware Features - High Speed SPI Interface (5 MHz at 4.5V I temp) - Supports SPI modes 0,0 and 1,1 - Clock out pin with programmable prescaler - Interrupt output pin with selectable enables - ‘B.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCP2515 |
Microchip Technology |
Stand-Alone CAN Controller | |
2 | MCP2517FD |
Microchip |
External CAN FD Controller | |
3 | MCP25020 |
Microchip |
CAN I/O Expander | |
4 | MCP25025 |
Microchip |
CAN I/O Expander | |
5 | MCP25050 |
Microchip |
CAN I/O Expander | |
6 | MCP25055 |
Microchip |
CAN I/O Expander | |
7 | MCP2542FD |
Microchip |
CAN FD Transceiver | |
8 | MCP2542WFD |
Microchip |
CAN FD Transceiver | |
9 | MCP2544FD |
Microchip |
CAN FD Transceiver | |
10 | MCP2544WFD |
Microchip |
CAN FD Transceiver | |
11 | MCP2551 |
Microchip Technology |
High-Speed CAN Transceiver | |
12 | MCP2561 |
Microchip |
High-Speed CAN Transceiver |