Pin # Pin Name Function 1 Vin Powers the IC 2 GND The IC’s ground 3 ON/OFF Shuts or wakes−up the IC 4 NC None 5 Vout Delivers the output voltage Description A positive voltage up to 12 V can be applied upon this pin. A 900 mV level on this pin is sufficient to start the IC. A 150 mV shuts it down. It makes no arm to connect the pin to a kn.
• Ultra−Low Noise: 150 nV/√Hz @ 100 Hz, 40 mVRMS
100 Hz−100 kHz Typical, Iout = 60 mA, Co = 1.0 mF
• Fast Response Time from OFF to ON: 40 ms Typical at a 200 Hz
Repetition Rate
• Ready for 1.0 V Platforms: ON with a 900 mV High Level
• Nominal Output Current of 80 mA with a 100 mA Peak Capability
• Typical Dropout of 90 mV @ 30 mA, 160 mV @ 80 mA
• Ripple Rejection: 70 dB @ 1.0 kHz
• 1.5% Output Precision @ 25°C
• Thermal Shutdown
• Vout Available at 2.8 V, 2.9 V
• Operating Range from −40 to +85°C
• Dual Version is Available as MC33762
• These are Pb−Free Devices
Applications
• Noise Sensiti.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MC33762 |
ON Semiconductor |
Dual Ultra Low-Noise Low Dropout Voltage Regulator | |
2 | MC33765 |
ON Semiconductor |
Very Low Dropout/Ultra Low Noise 5 Outputs Voltage Regulator | |
3 | MC33702 |
Motorola |
Microprocessor Power Supply | |
4 | MC3370P |
Motorola |
Zero Voltage Switch | |
5 | MC3371 |
Motorola |
(MC3372) LOW POWER FM IF | |
6 | MC3371 |
LANSDALE Semiconductor |
Low Power Narrowband FM IF | |
7 | MC3372 |
LANSDALE Semiconductor |
Low Power Narrowband FM IF | |
8 | MC3372 |
Motorola |
Low Power Narrowband FM IF | |
9 | MC3373 |
Motorola |
Remote Control Amplifier/Detector | |
10 | MC33730 |
NXP |
Switch Mode Power-Supply | |
11 | MC3374 |
Motorola |
LOW VOLTAGE SINGLE CONVERSION FM RECEIVER | |
12 | MC33742 |
Motorola |
System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver |