M29W008AB - ST Microelectronics

M29W008AB 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory

The M29W008A is a non-volatile memory that may be erased electrically at the block or chip level and programmed in-system on a Byte-by-Byte basis using only a single 2.7V to 3.6V VCC supply. For Program and Erase operations the necessary high voltages are generated internally. The device can also be programmed in standard programmers. The array matrix organi.

Features

008AT M29W008AB 8 DQ0-DQ7 s s RB VSS AI02716 March 2000 1/30 M29W008AT, M29W008AB Figure 2. TSOP Connections Table 1. Signal Names A0-A19 Address Inputs Data Input/Outputs, Command Inputs Chip Enable Output Enable Write Enable Reset/Block Temporary Unprotect Ready/Busy Output Supply Voltage Ground Not Connected Internally A16 A15 A14 A13 A12 A11 A9 A8 W RP NC RB A18 A7 A6 A5 A4 A3 A2 A1 1 40 10 M29W008AT 31 11 M29W008AB 30 20 21 AI02717 A17 VSS NC A19 A10 DQ7 DQ6 DQ5 DQ4 VCC VCC NC DQ3 DQ2 DQ1 DQ0 G VSS E A0 DQ0-DQ7 E G W RP RB VCC VSS NC DESCRIPTION The M29W008A is a non-vola.