Output select pin OUT MIX { × Y { { C { { www.DataSheet4U.com Equivalent Circuit 14 VCC_A Control of Pin1 1 5kΩ 40kΩ S-CTL 1.6V REF 1.6V BUF 2.4V H(VCC) ⇒ { × × 16 2 P-SAVCTL VCC or 0V Power save mode select pin Control of Pin2 L(GND) H(VCC) 0V to 0.5V OPEN or VCC±0.5V ⇒ ⇒ Mode Active Standby A-GND 14 VCC_A 50kΩ 50kΩ 50kΩ 4kΩ 2 P-SAV-CTL 16 .
• Output coupling capacity not required
• Low-voltage drive (VCC = 2.7V to 3.6V)
• Νο V-sag
• Sextic LPF incorporated (fc = 10MHz)
• 6dB amplifier
• Current drain of 0µA in the standby mode
• Output drive capable of covering maximum 75Ω output, one channel
Specifications
Maximum Ratings at Ta = 25°C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta ≤ 80°C,
*Mounted on a specified board Conditions Ratings 4.0 220 -20 to +80 -55 to +150 Unit V mW °C °C
*: Mounted on a specified board: 114.3mm×76.1mm×1.6mm, .
Output select pin Control of Pin1 OUT MIX Y C L(GND) 0V to 0.5V ⇒ { { { M(OPEN) OPEN or 1.6V±0.1V ⇒× {{ H(VCC) .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA73072CL |
Sanyo Semicon Device |
LA73072CL | |
2 | LA73073CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver for DSC | |
3 | LA73074CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
4 | LA73079CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
5 | LA7300M |
Sanyo Semicon Device |
VHS VTR PLAYBACK HEAD AMP | |
6 | LA73024AV |
Sanyo Semicon Device |
Double Scart Interface IC | |
7 | LA73026AV |
Sanyo Semicon Device |
Double Scart Interface IC | |
8 | LA73031V |
Sanyo Semicon Device |
Video Signal Input Switch | |
9 | LA73031V |
ON Semiconductor |
Video Signal Input Switch | |
10 | LA73033M |
Sanyo Semicon Device |
Monolithic Linear IC I2C bus control (excluding standby control and RGB through control) | |
11 | LA73050 |
Sanyo Semicon Device |
Monolithic Linear IC 6ch 75ohm Video Driver | |
12 | LA73051 |
Sanyo Electric |
3Ch Video Driver |