Equivalent Circuit 10 VCC 2.16V REF 1.2V 2 BUF 0.72V 2kΩ 5 GND 3 VIN 1.1V Video input pin (Sync-chip clamp (input High-impedance)) 10 VCC 2kΩ 2kΩ 200Ω 200Ω VIN GAIN SET: 6dB ⇒1.0Vp-p GAIN SET: 12dB ⇒500mVp-p GAIN SET: 9dB ⇒710mVp-p 3 2kΩ Active: ON Standby: OFF 5 GND 26kΩ 1.1V 4 PSAVCTL VCC or 0V Power save mode select pin Control of Pin4.
• Output coupling capacity not required
• Low-voltage drive (VCC = 2.7V to 3.6V)
• Νο V-sag
• Sextic LPF incorporated (fc = 7.5MHz)
• Current drain of 0µA in the standby mode
• Amplifier gain selectable from three options (6, 12, and 9dB) (Pin control (GND/Open/VCC))
• Output drive capable of covering maximum 75Ω output, one channel
Specifications
Maximum Ratings at Ta = 25°C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta ≤ 80°C,
*Mounted on a specified board Conditions Ratings 4.0 160 -20 to +85 -55 to.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA73072CL |
Sanyo Semicon Device |
LA73072CL | |
2 | LA73073CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver for DSC | |
3 | LA73076V |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
4 | LA73076V |
ON Semiconductor |
Video Driver | |
5 | LA73079CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
6 | LA7300M |
Sanyo Semicon Device |
VHS VTR PLAYBACK HEAD AMP | |
7 | LA73024AV |
Sanyo Semicon Device |
Double Scart Interface IC | |
8 | LA73026AV |
Sanyo Semicon Device |
Double Scart Interface IC | |
9 | LA73031V |
Sanyo Semicon Device |
Video Signal Input Switch | |
10 | LA73031V |
ON Semiconductor |
Video Signal Input Switch | |
11 | LA73033M |
Sanyo Semicon Device |
Monolithic Linear IC I2C bus control (excluding standby control and RGB through control) | |
12 | LA73050 |
Sanyo Semicon Device |
Monolithic Linear IC 6ch 75ohm Video Driver |