3 VIN 1.1V Video input terminal (Sync-tip clamp (input High-impedance)) 4 PSAVCTL VCC or 0V Power save mode select pin Control of Pin4 H(VCC) L(GND) OPEN or VCC±0.5V 0V to 0.3V ⇒ ⇒ MODE STANDBY ACTIVE 5 GND 0V Continued on next page. No.0071-4/6 LA73073CL Continued from preceding page. Pin No 6 Symbol CLKOUT Equivalent Circuit Voltage +3.0V ↑↓ .
• Not requires output coupling capacity.
• Low voltage drive (VCC = 2.8V to 3.6V)
• V sag does not occur.
• Implements 6th Low Pass Filter (fc = 7.5MHz)
• Current dissipation in stand-by mode : 0µA
• Selectable amplifier gain of 6dB, 12dB and 16dB. (Pin control (GND/Open/VCC))
• Output drive performance allows up to 75Ω output and single system.
Specitications
Maximum Ratings at Ta = 25 °C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta ≤ 80°C, ∗Mounted on a board Conditions Ratings 4.0 160 -25 to +80 -5.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA73072CL |
Sanyo Semicon Device |
LA73072CL | |
2 | LA73074CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
3 | LA73076V |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
4 | LA73076V |
ON Semiconductor |
Video Driver | |
5 | LA73079CL |
Sanyo Semicon Device |
Monolithic Linear IC Video Driver | |
6 | LA7300M |
Sanyo Semicon Device |
VHS VTR PLAYBACK HEAD AMP | |
7 | LA73024AV |
Sanyo Semicon Device |
Double Scart Interface IC | |
8 | LA73026AV |
Sanyo Semicon Device |
Double Scart Interface IC | |
9 | LA73031V |
Sanyo Semicon Device |
Video Signal Input Switch | |
10 | LA73031V |
ON Semiconductor |
Video Signal Input Switch | |
11 | LA73033M |
Sanyo Semicon Device |
Monolithic Linear IC I2C bus control (excluding standby control and RGB through control) | |
12 | LA73050 |
Sanyo Semicon Device |
Monolithic Linear IC 6ch 75ohm Video Driver |