.............. 1 3 Pinout ............. 3 4 Code example Arduino ...........
odule provides a NTC thermistor - it will have a lower resistant on higher temperatures. Export: 16.06.2017 Copyright by Joy-IT - Published under CC BY-NC-SA 3.0 Page 54 of 214 KY-013 Temperature-Sensor module You can draw near to the resistant change via maths and convert it into a linear course. With that you can determine the temperature coefficient (addicted from resistant change to temperature change). With that you can determine the actual temperature if you know the current resistance. This resistor can be determinded via voltage devider, where a known voltage splits up between a k.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | KY-010 |
Joy-IT |
Light barrier-module | |
2 | KY-011 |
Joy-IT |
2-Color (Red+Green) 5mm LED module | |
3 | KY-012 |
Joy-IT |
Active Piezo-Buzzer module | |
4 | KY-015 |
Joy-IT |
Combi-Sensor Temperature + Humidity | |
5 | KY-016 |
Joy-IT |
RGB 5mm LED module | |
6 | KY-017 |
Joy-IT |
Tilt switch module | |
7 | KY-018 |
Joy-IT |
Photoresistor module | |
8 | KY-019 |
Joy-IT |
5V Relais module | |
9 | KY-001 |
Joy-IT |
Temperature sensor module | |
10 | KY-002 |
Joy-IT |
Vibration-switch module | |
11 | KY-003 |
Joy-IT |
Hall Magnetic Field Sensor | |
12 | KY-004 |
Joy-IT |
Button-module |