.............. 1 3 Pinout ............. 2 4 Code example Arduino ...........
and a green LED. These LEDs are connected with a common cathode. Resistors are needed for different input voltages. Vf [typ]= 2,0-2,5V If= 20mA Pre-resistors: Export: 16.06.2017 Copyright by Joy-IT - Published under CC BY-NC-SA 3.0 Page 46 of 214 KY-011 2-Color (Red+Green) 5mm LED module Rf (3,3V) [Green]= 120Ω Rf (3,3V) [Red]= 120Ω [for example using ARM CPU-Core based microcontroller like Raspbarry Pi] Rf (5V) [Green] = 220Ω Rf (5V) [Red] = 220Ω [for example using Atmel Atmega based microcontroller like Arduino] Pinout Code example Arduino Code example ON/OFF int Led_Red = 10; int .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | KY-010 |
Joy-IT |
Light barrier-module | |
2 | KY-012 |
Joy-IT |
Active Piezo-Buzzer module | |
3 | KY-013 |
Joy-IT |
Temperature-Sensor module | |
4 | KY-015 |
Joy-IT |
Combi-Sensor Temperature + Humidity | |
5 | KY-016 |
Joy-IT |
RGB 5mm LED module | |
6 | KY-017 |
Joy-IT |
Tilt switch module | |
7 | KY-018 |
Joy-IT |
Photoresistor module | |
8 | KY-019 |
Joy-IT |
5V Relais module | |
9 | KY-001 |
Joy-IT |
Temperature sensor module | |
10 | KY-002 |
Joy-IT |
Vibration-switch module | |
11 | KY-003 |
Joy-IT |
Hall Magnetic Field Sensor | |
12 | KY-004 |
Joy-IT |
Button-module |