The KMA199E is a magnetic angle sensor system. The MagnetoResistive (MR) sensor bridges and the mixed signal Integrated Circuit (IC) are integrated into a single package. This angular measurement system KMA199E is pre-programmed, pre-calibrated and therefore, ready to use. The KMA199E allows user specific adjustments of angular range, zero angle and clamping.
High precision sensor for magnetic
Ratiometric output voltage
angular measurement
Programmable user adjustments,
Independent from the magnetic field
including zero angle and angular range strength above 35 kA/m
Single package sensor system
Programming via One-Wire Interface
(OWI)
Magnet-lost and power-lost detection
Fail-safe EEPROM
Built-in transient protection
High temperature range
User-programmable 32-bit identifier
Factory calibrated
Ready to use
NXP Semiconductors
KMA199E
Programmable angle sensor
2. Pinning information
Table 1. Pinning
Pin S.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | KMA199 |
NXP |
Programmable angle sensor | |
2 | KMA1117 |
Guangdong Kexin Industrial |
1A Low Dropout Positive Adjustable | |
3 | KMA010-xxx |
Advanced Interconnections |
Board to Board Interconnecttions | |
4 | KMA010P20Q |
KEC |
P-Ch Trench MOSFET | |
5 | KMA200 |
NXP |
Programmable angle sensor | |
6 | KMA210 |
NXP |
Programmable angle sensor | |
7 | KMA220 |
NXP |
Dual channel programmable angle sensor | |
8 | KMA221 |
NXP |
Programmable angle sensor | |
9 | KMA2D0DP20X |
KEC |
TSOP-6 PACKAGE | |
10 | KMA2D3P20S |
KEC |
P-Ch Trench MOSFET | |
11 | KMA2D4P20S |
KEC |
P-Ch Trench MOSFET | |
12 | KMA2D4P20SA |
KEC |
P-Channel MOSFET |