The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB. Used in conjunction with isolated power suppl.
• Meets the requirements of ISO11898-2
• 5000-VRMS isolation (ISO1050DW)
• 2500-VRMS isolation (ISO1050DUB)
• Fail-safe outputs
• Low loop delay: 150 ns (typical), 210 ns
(maximum)
• 50-kV/μs typical transient immunity
• Bus-fault protection of
–27 V to 40 V
• Driver (TXD) dominant time-out function
• I/O voltage range supports 3.3 V and 5 V
microprocessors
• Safety-related certifications
– VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
– UL 1577 approved
– CSA approved for IEC 61010-1, IEC 60601-1
– TUV Reinforced Insulation Approval for
EN/UL/CSA 62368-1 (ISO1050DW-Only)
– CQC reinforced.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ISO100 |
Burr-Brown Corporation |
Optically-Coupled Linear ISOLATION AMPLIFIER | |
2 | ISO1002 |
YUAN |
Small Signal Amplifier | |
3 | ISO1003-xx-x |
YUAN |
Two Wires 4-20mA Isolated Signal Transmitter | |
4 | ISO102 |
Burr-Brown Corporation |
SIGNAL ISOLATION BUFFER AMPLIFIERS | |
5 | ISO103 |
Burr-Brown Corporation |
Low-Cost/ Internally Powered ISOLATION AMPLIFIER | |
6 | ISO1042 |
Texas Instruments |
CAN Transceiver | |
7 | ISO1042-Q1 |
Texas Instruments |
Automotive Isolated CAN Transceiver | |
8 | ISO1044 |
Texas Instruments |
Isolated CAN FD Transceiver | |
9 | ISO106 |
Burr-Brown Corporation |
SIGNAL ISOLATION BUFFER AMPLIFIERS | |
10 | ISO107 |
Burr-Brown Corporation |
High-Voltage/ Internally Powered ISOLATION AMPLIFIER | |
11 | ISO113 |
Burr-Brown Corporation |
Low-Cost/ High-Voltage/ Internally Powered OUTPUT ISOLATION AMPLIFIER | |
12 | ISO1176 |
Texas Instruments |
RS-485 Profibus Transceiver |