Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The ISO100 is an optically-coupled isolation amplifier. High accuracy, linearity, and time-temperature stability are achieved by coupling light from an LED back to the input (negative feedback) as well as forward to the output. Optical components are carefully matched and the amplifier is actively laser-trimmed to assure excellent tracking and low offset err.
q EASY TO USE, SIMILAR TO AN OP AMP VOUT/IIN = RF, Current Input VOUT/VIN = RF/RIN, Voltage Input q 100% TESTED FOR BREAKDOWN: 750V Continuous Isolation Voltage q ULTRA-LOW LEAKAGE: 0.3µA, max, at 240V/60Hz q WIDE BANDWIDTH: 60kHz q 18-PIN DIP PACKAGE APPLICATIONS q INDUSTRIAL PROCESS CONTROL Transducer Sensing (Thermocouples, RTD, Pressure Bridges) 4mA to 20mA Loops Motor and SCR Control Ground Loop Elimination q BIOMEDICAL MEASUREMENTS q TEST EQUIPMENT q DATA ACQUISITION DESCRIPTION The ISO100 is an optically-coupled isolation amplifier. High accuracy, linearity, and time-temperature stabi.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | ISO1002 |
YUAN |
Small Signal Amplifier |
|
| 2 | ISO1003-xx-x |
YUAN |
Two Wires 4-20mA Isolated Signal Transmitter |
|
| 3 | ISO102 |
Burr-Brown Corporation |
SIGNAL ISOLATION BUFFER AMPLIFIERS |
|
| 4 | ISO103 |
Burr-Brown Corporation |
Low-Cost/ Internally Powered ISOLATION AMPLIFIER |
|
| 5 | ISO1042 |
Texas Instruments |
CAN Transceiver |
|
| 6 | ISO1042-Q1 |
Texas Instruments |
Automotive Isolated CAN Transceiver |
|
| 7 | ISO1044 |
Texas Instruments |
Isolated CAN FD Transceiver |
|
| 8 | ISO1050 |
Texas Instruments |
CAN Transceiver |
|
| 9 | ISO106 |
Burr-Brown Corporation |
SIGNAL ISOLATION BUFFER AMPLIFIERS |
|
| 10 | ISO107 |
Burr-Brown Corporation |
High-Voltage/ Internally Powered ISOLATION AMPLIFIER |
|
| 11 | ISO113 |
Burr-Brown Corporation |
Low-Cost/ High-Voltage/ Internally Powered OUTPUT ISOLATION AMPLIFIER |
|
| 12 | ISO1176 |
Texas Instruments |
RS-485 Profibus Transceiver |
|