R64.A R64.C PIN NUMBER PIN NUMBER PIN NAME DESCRIPTION 1 FB This pin is the voltage feedback input to the internal error amplifier. Connect a resistor from FB to VOUT and from FB to AGND to adjust the output voltage in accordance with Equation 1: VOUT = VREF 1 + RT RB (EQ. 1) Where: VOUT = Output voltage VREF = Reference voltage (0.6V typica.
• DLA SMD 5962-12202
• Output current for a single device - 14A at TJ = +125°C; 12A at TJ = +150°C
• Output current for two paralleled devices - 22A at TJ = +125°C; 19A at TJ = +150°C
• Available in a thermally enhanced heatsink package - R64.C
• 1MHz or 500kHz switching frequency
• 3V to 5.5V supply voltage range
• ±1% Reference voltage (line, load, temp. and rad)
• Prebiased load compatible
• Redundancy/junction isolation: Exceptional SET performance
• Excellent transient response
• High efficiency >90%
• Two ISL70002SEH synchronization, inverted-phase
• Comparator input for enable and power.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ISL70001ASEH |
Intersil |
Rad Hard and SEE Hard 6A Synchronous Buck Regulator | |
2 | ISL70001SEH |
Intersil |
Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator | |
3 | ISL70001SRH |
Intersil Corporation |
Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator | |
4 | ISL70003ASEH |
Intersil |
9A Buck Regulator | |
5 | ISL70003SEH |
Intersil |
6A Buck Regulator | |
6 | ISL70020SEH |
Intersil |
65A Enhancement Mode GaN Power Transistors | |
7 | ISL70023SEH |
Intersil |
60A Enhancement Mode GaN Power Transistor | |
8 | ISL70024SEH |
Intersil |
7.5A Enhancement Mode GaN Power Transistor | |
9 | ISL70040SEH |
Intersil |
Radiation Hardened Low-Side GaN FET Driver | |
10 | ISL70062SEH |
Intersil |
Radiation Hardened 10A NMOS Load Switch | |
11 | ISL70218SEH |
Intersil |
Low-Power Operational Amplifiers | |
12 | ISL70218SRH |
Intersil |
Low-Power Operational Amplifiers |