NAME VCC GND CLK DIP PIN 24 12 11 I TYPE DESCRIPTION The +5V Power Supply Pin. A 0.1µF capacitor between the VCC and GND pin is recommended. The device ground. Input Clock. Data is latched on the low to high transition of this clock signal. Input setup and hold times with respect to the clock must be met for proper operation. Data Input Port. These inputs a.
• Four 8-Bit Registers
• Hold, Transfer and Load Instructions
• Single 4-Stage or Dual-2 Stage Pipelining
• All Register Contents Available at Output
• Fully TTL Compatible
• Three-State Outputs
• High Speed, Low Power CMOS
Applications
• Array Processor
• Digital Signal Processor
• A/D Buffer
• Telecommunication
• Byte Wide Shift Register
• Mainframe Computers
Pinout
HSP9520, HSP9521 (SOIC, PDIP) TOP VIEW
I0 1 I1 2 24 VCC 23 S0 22 S1 21 Y0 20 Y1 19 Y2 18 Y3 17 Y4 16 Y5 15 Y6 14 Y7 13 OE
Ordering Information
PART NUMBER HSP9520CP HSP9520CS HSP9521CP HSP9521CS TEMP. RANGE (oC) 0 to 70 0 to 7.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HSP9520 |
Intersil Corporation |
Multilevel Pipeline Registers | |
2 | HSP9501 |
Intersil Corporation |
Programmable Data Buffer | |
3 | HSP-1920 |
Digital View |
Component INTERFACE CONTROLLER | |
4 | HSP-4096 |
Digital View |
HDMI INTERFACE CONTROLLER | |
5 | HSP051-2W3Y |
STMicroelectronics |
Automotive 2-line ESD protection | |
6 | HSP051-4M5 |
STMicroelectronics |
4-line ESD protection | |
7 | HSP051-4N10 |
STMicroelectronics |
4-line ESD protection | |
8 | HSP053-4M5 |
STMicroelectronics |
4-line ESD protection | |
9 | HSP061-4NY8 |
ST Microelectronics |
4-line ESD protection | |
10 | HSP181-2W3Y |
STMicroelectronics |
Automotive grade 18V dual-line high speed port protection | |
11 | HSP3824 |
Harris Corporation |
Direct Sequence Spread Spectrum Baseband Processor | |
12 | HSP43124 |
Intersil Corporation |
Serial I/O Filter |