Table 2. Pin Details of EM68916D Symbol CK, CK Type Input Description EM68916DVAA Differential Clock: CK and CK are differential clock inputs. All address and control input signals are sampled on the crossing of the positive edge of CK and negative edge of CK . Input and output data is referenced to the crossing of CK and CK (both directions of the crossi.
Fast clock rate: 166/133 MHz Differential Clock CK & CK Bi-directional DQS Four internal banks, 2M x 16-bit for each bank Edge-aligned with read data, centered in write data Programmable Mode and Extended Mode Registers
• - CAS Latency: 2, or 3 - Burst length: 2, 4, or 8 - Burst Type: Sequential & Interleaved - PASR (Partial Array Self Refresh) - Auto TCSR (Temperature Compensated Self Refresh) - DS (Drive Strength)
• Individual byte writes mask control
• DM Write Latency = 0
• Precharge Standby Current = 100 µA
• Self Refresh Current = 200 µA
• Deep power-down Current = 10 µA max. at 85
• Aut.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | EM68916CWQA |
Etron Technology |
8M x 16 bit DDRII Synchronous DRAM | |
2 | EM68932DVKA |
Etron Technology |
4M x 32 Mobile DDR Synchronous DRAM | |
3 | EM68932DVKB |
Etron Technology |
4M x 32 Mobile DDR Synchronous DRAM | |
4 | EM680FU16A |
Emerging Memory & Logic Solutions |
512Kx16 SRAM | |
5 | EM680FV8AU |
Emerging Memory & Logic Solutions |
1Mx8 SRAM | |
6 | EM6819 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter | |
7 | EM6819F2-A000 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter | |
8 | EM6819F2-B000 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter | |
9 | EM6819F2-B006 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter | |
10 | EM6819F2-B300 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter | |
11 | EM6819F4-A000 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter | |
12 | EM6819F4-A005 |
EM Microelectronic |
Sub-1V (0.6V) 8bit Flash MCU DC-DC Converter |