The EM4222 is used in passive UHF read-only transponder applications. It is powered up by an RF beam transmitted by the reader, which is received and rectified to generate a supply voltage for the chip. A preprogrammed code is transmitted to the reader by varying the amount of energy that is reflected back to the reader. It implements a robust and fast anti-.
Factory programmed 64 bit unique ID number High data rate: Up to 256 kbit/s Frequency independent: Typically used at 869 MHz, 902 - 928 MHz, 2.45 GHz On-chip oscillator On-chip rectifier Low voltage operation - down to 1.0 V Low power consumption Cost effective -40 to +85°C operating temperature range Available in die form Operating Configuration UHF transponders can be implemented using an EM4222 chip and an antenna. Typical Applications The EM4222 is ideal for applications where long range, high-speed item identification is required: Supply chain management (SCM) Tracking and tracing Acces.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | EM4223 |
EM Microelectronic |
Read-only UHF Radio Frequency Identification | |
2 | EM4200 |
EM Microelectronic |
128-bit Read Only Low Frequency Contactless Identification | |
3 | EM4233SLIC |
EM Microelectronic |
Long range passive CMOS | |
4 | EM4269 |
EM Microelectronic |
512 bit Read/Write Contactless Identification | |
5 | EM428M1644RTA |
Eorex |
Double DATA RATE SDRAM | |
6 | EM42AM1684RTC |
Eorex |
Double DATA RATE SDRAM | |
7 | EM42BM3284LBA |
Eorex |
Double DATA RATE SDRAM | |
8 | EM42CM1684RTA |
Eorex |
Double DATA RATE SDRAM | |
9 | EM42GT |
EUROQUARTZ limited |
TCXO | |
10 | EM4 |
ETC |
Electronic Indicator | |
11 | EM4 |
ETC |
Tube | |
12 | EM4 |
Philips |
Tuning Indicator |