The DLPA3005 is a highly-integrated power management IC optimized for DLP® Pico™ Projector systems. The DLPA3005 supports LED projectors up to 16 A per LED and up to 32 A for series LEDs, enabled by an integrated high efficiency buck controller. Additionally, the drivers control the RGB switches, supporting the sequencing of R, G, and B LEDs. The DLPA3005 c.
• High-efficiency, high-current RGB LED driver
• Drivers for external buck FETs up to 16 A
• Drivers for external RGB switches
• 10-bit programmable current per channel
• Inputs to select color-sequential RGB LEDs
• Generation of DMD high voltage supplies
• Two high efficiency buck converters to generate
the DLPC343x and DMD supply
• One high efficiency, 8-bit programmable buck
converter for fan driver application or general power supply. General purpose buck2 (PWR6) is currently supported.
• Two LDOs supplying auxiliary voltages
• Analog MUX for measuring internal and external nodes such as a.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DLPA300 |
Texas Instruments |
DLP Digital Micromirror Driver | |
2 | DLPA3000 |
Texas Instruments |
PMIC and High-Current LED Driver | |
3 | DLPA004 |
Diodes |
DATA BUS TRANSIENT SUPPRESSOR | |
4 | DLPA006 |
Diodes Incorporated |
DATA BUS TRANSIENT SUPPRESSOR/THREE PHASE FULL WAVE BRIDGE RECTIFIER | |
5 | DLPA100 |
Texas Instruments |
Power Management and Motor Driver | |
6 | DLPA1000 |
Texas Instruments |
Power Management and LED Driver | |
7 | DLPA2000 |
Texas Instruments |
Power Management and LED/Lamp Driver | |
8 | DLPA2005 |
Texas Instruments |
Power Management and LED/Lamp Driver | |
9 | DLPA4000 |
Texas Instruments |
PMIC and High-Current LED Driver | |
10 | DLP-IO8-G |
DLP Design |
USB-BASED 8-CHANNEL DATA ACQUISITION MODULE | |
11 | DLP05LC |
Diodes Incorporated |
LOW CAPACITANCE UNIDIRECTIONAL TVS | |
12 | DLP0NSA150HL2 |
Murata |
Chip Common Mode Choke Coil |