DLPA1000 is a dedicated PMIC / RGB LED driver for the DLP2000 Digital Micromirror Devices (DMD) when used with a DLPC2607 digital controller. For reliable operation of these chipsets, it is mandatory to use the DLPA1000. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) DLPA1000 DSBGA (49) 2.40 mm × 2.40 mm (1) For all available packages, see.
•1 High-Efficiency RGB LED Driver With Buck-Boost DC-to-DC Converter and Integrated MOSFETS
• Six Low-Impedance (<100 mΩ) MOSFET Switches for Channel Selection
• Independent, 10-Bit Current Control per Channel
• DMD Regulators
– Requires Only a Single Inductor
– VOFS: 8.5 V
– VBIAS: 16 V
– VRST:
–10 V
• Reset Generation and Power Supply Sequencing
• RGB LED Strobe Decoder Supports:
– Common-Anode RGBs
– Cathode-Cathode-Anode RGBs
• 33-MHz Serial Peripheral Interface (SPI)
• Multiplexer for Measuring Analog Signals
– Battery Voltage
– LED Voltage, LED Current
– Light Sensor (for White Point Cor.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DLPA100 |
Texas Instruments |
Power Management and Motor Driver | |
2 | DLPA004 |
Diodes |
DATA BUS TRANSIENT SUPPRESSOR | |
3 | DLPA006 |
Diodes Incorporated |
DATA BUS TRANSIENT SUPPRESSOR/THREE PHASE FULL WAVE BRIDGE RECTIFIER | |
4 | DLPA2000 |
Texas Instruments |
Power Management and LED/Lamp Driver | |
5 | DLPA2005 |
Texas Instruments |
Power Management and LED/Lamp Driver | |
6 | DLPA300 |
Texas Instruments |
DLP Digital Micromirror Driver | |
7 | DLPA3000 |
Texas Instruments |
PMIC and High-Current LED Driver | |
8 | DLPA3005 |
Texas Instruments |
PMIC and High-Current LED Driver | |
9 | DLPA4000 |
Texas Instruments |
PMIC and High-Current LED Driver | |
10 | DLP-IO8-G |
DLP Design |
USB-BASED 8-CHANNEL DATA ACQUISITION MODULE | |
11 | DLP05LC |
Diodes Incorporated |
LOW CAPACITANCE UNIDIRECTIONAL TVS | |
12 | DLP0NSA150HL2 |
Murata |
Chip Common Mode Choke Coil |