The BL0952A/BL6513/BL6511 is the chief IC of the three-phase electrical meter and a high accuracy energy measurement IC. With low power design, static power is only 25mW. Based on the features such as superior accuracy, high stability and simple peripheral circuit, the BL0952A/BL6513/BL6511 is compatible with 3-phase 3-wire and 3-phase 4-wire configurations..
High accuracy, less than 0.1% error over a dynamic range of 500:1 High stability during calibration, the fluctuation of output CF is less than 0.1%. Low drift, the gain variety is less than 0.1% when input frequency changes from 45Hz to 65Hz Single 5V Supply, Static Power 25mW(typical), Power solution only with Resistor & Capacitor can be adopted. The Low Frequency Output (F1, F2) can drive motor directly; The High Frequency Output (CF) can be used in calibration and data processing. Selectable between the arithmetic sum of the three-phase active energies and the absolute value sum of these en.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BL6511 |
SHANGHAI BELLING |
Three-phase Active Energy Meter | |
2 | BL6512 |
SHANGHAI BELLING |
With phase-phase metering chip output | |
3 | BL6513C |
SHANGHAI BELLING |
Three-phase four-wire wide-range meter | |
4 | BL6514 |
SHANGHAI BELLING |
Phase active power metering chip | |
5 | BL6501 |
Shanghai Belling |
Single Phase Energy Meter IC | |
6 | BL6501A |
SHANGHAI BELLING |
Single Phase Energy Meter IC | |
7 | BL6502 |
SHANGHAI BELLING |
Integrated Oscillator Single Phase Current Sampling Energy Metering IC | |
8 | BL6503 |
SHANGHAI BELLING |
Single Phase Energy Meter IC | |
9 | BL6503E |
BELLING |
Single Phase Energy Meter IC | |
10 | BL652 |
Laird |
enable OEMs to add single-mode Bluetooth | |
11 | BL652-SA |
Laird |
enable OEMs to add single-mode Bluetooth | |
12 | BL652-SC |
Laird |
enable OEMs to add single-mode Bluetooth |